Commander GP20 AC Drive

(This drive Series is no Longer available, Call Microcon for a replacement.)

General Purpose AC Variable Speed Drive
0.75 to 110kW    

1 to 200HP (0.75kW to 132kW) 230V / 460V / 575V / 690V)

The Commander GP20 is the highest performance and simplest to use General Purpose AC drive available today. Its operating modes are V/Hz (default), Open Loop Vector, or Rotor Flux Control (RFC), which provides simulated encoder feedback for outstanding motor shaft performance. Set up is intuitive using the Smartcard and selecting from its ten macros to auto configure the drive. The Smartcard also provides a safe and unique way to store and download drive settings for fast and easy cloning.

Key Features

  • Digital AC drive
  • V/Hz standard default mode or can be programmed in Open Loop Vector or Rotor Flux Control mode
  • Two zero-space solution module slots for fieldbus and additional I/O
  • Smartcard for simple setup and cloning, includes 10 macros for rapid start-up
  • External 24 VDC backup control supply connections
  • PLC functionality built in with IEC 61131-3 programming language
  • Modbus port for remote display and peripherals
  • Plain text LCD keypad, completely configurable in multiple languages: English (default), French, German, Spanish, Italian, or can be easily customized
  • PC compatible
  • Built-In EMC filter
  • Easy access terminals for easy wiring
  • Ref: keypad, 0-10VDC, 0-20mA, 4-20mA, Presets, 7 digital inputs
  • Carrier frequency 3, 6, 12, or 16 KHz
  • 0 to 3,000 Hz output frequency
  • IP20 or NEMA 1 mounting
  • Built-in dynamic braking transistor
  • Dual motor maps
  • Open loop vector control providing full torque at very low speeds (1 Hz)
  • 150% overload for 1 minute
  • Accurate auto-tune for optimum motor shaft performance
  • Very quiet motor operation with high switching frequency selectable up to 12 kHz
  • Output frequency to 1000 Hz
  • Motor over and under voltage protection
  • Motor overload protection
User Advantages
Time saving set up with application macros
Simple easy start-up guides
Quick and accurate motor information with auto-tune features
Smooth start and run with 150% overload
Optimized performance with open loop vector - full torque at 1 Hz
Quiet motor operation with high switching frequencies
2 year warranty
Flexibility of Use
Motor current indication
Motor speed indication
Catch a spinning load facility
Frequency slaving
4 preset speeds
2 skip frequencies with adjustable bandwidths
S ramp profiling
Status relay
Selection of speed references (4-20 mA, 20-4 mA, 0-20 mA, 0-10 V dc)
Extensive on board I/O
- 1 status relay
- 3 analogue inputs, 2 outputs
- 5 digital inputs, 1 output - (configuration is Macro dependant)

Commander GP20 AC Drive


LISTED E171230

Commander GP Parts List


Home / Contact Us / Products / Service / Sales /Supported Product / Powertec Support / Serviced Products / Feedback / Back


Microcon Technologies Inc.

1105 Crestlawn Drive, Unit # D8 & D9

Mississauga, Ontario L4W 1A7 Canada

Tel: (905) 602-4770

Fax: (905) 602-4779