 |
Full
MD29 functionality is retained, allowing a fully
distributed control system to be implemented. |
|
Supports
data rates up to 5.0 Mbits/sec |
|
"Peer-to-peer"
communications system allows every node to transmit data
to other nodes on the |
|
network |
|
No
master PLC required. MD29 provides local intelligence
using DPL programs. |
|
"Easy
Mode" set-up allows data transfer to be configured
using drive parameters only. No MD29 |
|
programming
required with "Easy Mode" |
|
Full
cyclic and non-cyclic transfers are configurable from SYPT |
|
Fast
cyclic data channel, transmits data on a configurable
timebase, ranging from 1 ms to 99 ms |
|
Slow
cyclic data channel, transmits data every 2 to 19 cycles
of the fast data channel |
|
Up
to 10 cyclic data links may be defined per node |
|
Non-cyclic
data channel allows a periodic communications between any
two nodes |
|
Cyclic
and non-cyclic data can be "broadcast" to all
other nodes |
|
Up
to 20 registers may be transferred on a single fast or
slow data link |
|
 |
 |
|
| Network |
|
RS485
transformer-isolated physical layer |
|
Data
rates from 1.25 Mbits/sec to 5.0 Mbits/sec |
|
Up
to 100m network length at 5.0 Mbits/sec |
|
Up
to 200m network length at 2.5 Mbits/sec |
|
Up
to 10 nodes without network repeaters |
|
|
| Environment |
|
Ambient
Temperature: -5ºC to +40ºC |
|
Storage
Temperature: -40ºC to +50ºC |
|
Weight:
79g |
|
Maximum
Altitude: 1000 m |
|
Humidity:
+5% to +95% at 40ºC non-condensing |
|
|
