Unidrive SP AC Drive - Rating Table

Selection			Normal Duty				Heavy Duty
Selection			Typical Motor Power		Continuous Output Current	Max. Output Current	Typical Motor Power		Continuous Output Current	Maximum Output Current
Model Reference	Frame Size	Supply Voltage & Motor Power Rated Voltage	(kW)	(hp)	In (A)	Open Loop (A)	(kW)	(hp)	In (A)	Open Loop (A)	Closed Loop (A)
SP1201	1	200 to 240V ± 10% kW at 220V hp at 230V	1.1	1.5	5.2	5.7	0.8	1.0	4.3	6.5	7.5
SP1202			1.5	2.0	6.8	7.5	1.1	2.0	5.8	8.7	10.2
SP1203			2.2	3.0	9.6	10.6	1.5	2.0	7.5	11.3	13.1
SP1204			3.0	3.0	11.0	12.1	2.2	3.0	10.6	15.9	18.6
SP2201	2		4.0	5.0	15.6	17.1	3.0	3.0	12.6	18.9	22.1
SP2202			5.5	7.5	22.0	24.2	4.0	5.0	17.0	25.5	29.8
SP2203			7.5	10.0	28.0	30.8	5.5	7.5	25.0	37.5	43.8
SP3201	3		11.0	15.0	42.0	46.2	7.5	10.0	31.0	46.5	54.3
SP3202	3		15.0	20.0	54.0	59.4	11.0	15.0	42.0	63.0	73.5
SP1401	1	380 to 480V ± 10% kW at 400V hp at 460V	1.1	1.5	2.8	3.1	0.8	1.0	2.1	3.2	3.7
SP1402			1.5	2.0	3.8	4.2	1.1	2.0	3.0	4.5	5.3
SP1403			2.2	3.0	5.0	5.5	1.5	3.0	4.2	6.3	7.4
SP1404			3.0	5.0	6.9	7.6	2.2	3.0	5.8	8.7	10.2
SP1405			4.0	5.0	8.8	9.7	3.0	5.0	7.6	11.4	13.3
SP1406			5.5	7.5	11.0	12.1	4.0	5.0	9.5	14.3	16.6
SP2401	2		7.5	10.0	15.3	16.8	5.5	10.0	13.0	19.5	22.8
SP2402			11.0	15.0	21.0	23.1	7.5	10.0	16.5	24.8	28.9
SP2403			15.0	20.0	29.0	31.9	11.0	20.0	25.0	37.5	43.8
SP3401	3		18.5	25.0	35.0	38.5	15.0	25.0	32.0	48.0	56.0
SP3402			22.0	30.0	43.0	47.3	18.5	30.0	40.0	60.0	70.0
SP3403			30.0	40.0	56.0	61.6	22.0	30.0	46.0	69.0	80.5
SP3501	3	500 to 575V ± 10% kW at 575V hp at 575V	3.0	5.0	5.4	5.9	2.2	3.0	4.0	6.0	7.0
SP3502			4.0	5.0	6.1	6.7	3.0	3.0	5.4	8.1	9.5
SP3503			5.5	7.5	8.3	9.1	3.0	5.0	6.1	9.2	10.7
SP3504			7.5	10.0	11.0	12.1	5.5	7.5	9.5	14.3	16.6
SP3505			11.0	15.0	16.0	17.6	7.5	10.0	12.0	18.0	21.0
SP3506			15.0	20.0	22.0	24.2	11.0	15.0	18.0	27.0	31.5
SP3507			18.5	25.0	27.0	29.7	15.0	20.0	22.0	33.0	38.5

All Unidrive SP modules have optional footprint filters for applications not met with standard on board filters

	Normal Duty (open loop)	Suitable for most applications, current overload is set at 110% for 60s. Where motor rated current is less than the drive rated continuous current, higher overloads are achieved.
	Heavy Duty (open loop)	Suitable for more demanding applications, current overload is set at 150% for 60s. Where motor rated current is less than the drive rated continuous current, higher overloads ( 200% or greater) are achieved.
	Heavy Duty (closed loop, servo)	Suitable for demanding applications where high dynamic shaft performance is necessary, current overload is set at 175% for 20s. Where motor rated current is less than the drive rated continuous current, higher overloads (200% or greater) are achieved.