CT Net Interface for Unidrive

UD75

CTNet is a high speed communications network and protocol, that allows large amounts of data to be transferred quickly between network nodes. CTNet is a de-centralized "peer-to-peer" system, requiring no master PLC controller, with each node taking its turn to control the network, and communicate directly with other network nodes. Supplied as the large option module Fully UD70 functionality is retained, allowing a fully distributed control system to be implemented Supports data rates up to 5.0 Mbits/sec "Peer-to-peer" communications system allows every node to transmit data to other nodes on the network No master controller required. Co-processor provides local intelligence using SYPT programs. "Easy Mode" set-up allows cyclic data transfer of upto 3 parameters in and out, to be configured  using drive parameters from keypad Full cyclic and non-cyclic transfers are configurable from SYPT Fast cyclic data channel, transmits data on a configurable timebase, ranging from 1 ms to 99 ms Slow cyclic data channel, transmits data every 2 to 19 cycles of the fast data channel Up to 10 cyclic data links may be defined per node Non-cyclic data channel allows a periodic communications between any two nodes Cyclic and non-cyclic data can be "broadcast" to all other nodes Up to 20 registers may be transferred on a single fast or slow data link Network RS485 transformer-isolated physical layer Data rates from 1.25 Mbits/sec to 5.0 Mbits/sec Up to 100m network length at 5.0 Mbits/sec Up to 200m network length at 2.5 Mbits/sec Up to 20 nodes without network repeaters Environment Ambient Temperature: -5ºC to +40ºC Storage Temperature: -40ºC to +50ºC Weight: 172g Maximum Altitude: 4000 m Humidity: +5% to +95% at 40ºC non-condensing

Products / Home