• Universal input configurable from keyboard.
• Accuracy better than 0.2% f.s. at nominal conditions.
• Configuration from service serial line available.
• Transmitter power supply.
• Relay, logic or triac control output with heat/cool function.
• 1 alarm with fully configurable function (up to 3 alarm points)
• Self-tuning, Auto-tuning, Soft-start
•  

• Universal input configurable from the faceplate
• Accuracy better than 0,2% f.s. at nominal condition
• Deviation bargraph indication
• Control output: relay or logic with Heat/Cool function
• 1 alarm with configurable function (up to 3 different alarm setpoints)
• Self-tuning, Auto-tuning, Soft-start, Man/Auto function
• Possibility to configure the unit by serial line
• Possibility of auxiliary input for current transformer 50mAac or 3rd alarm output, logic or relay (only 401 mod.)

• Universal input configurable from faceplate
• Accuracy better than 0.2% f.s. under nominal conditions
• Control output: relay, logic, Triac or continuous
• Hot/cold function with selection of cooling fluid
• 3 alarms with completely configurable function
• Analog retransmission output
• Isolated digital input with configurable function
• Auxiliary input for CT (TA) (50mAac)
• Heater break or probe short-circuit alarm
• Self-tuning, Auto-tuning, Soft-start, bumpless Man/Auto function
• Double set, set ramp, timed output function
• Optically isolated RS485 serial line.
  Protocol: GEFRAN CENCAL or MODBUS RTU
• Self-diagnosis
• Rapid configuration from PC with Winstrum packet

• Universal input configurable from faceplate
• Accuracy better than 0.2% f.s. under nominal conditions
• Control output: relay, logic, Triac or continuous
• Hot/cold function with selection of cooling fluid
• 3 alarms with completely configurable function
• Analog retransmission output
• Up to 2 isolated digital inputs with configurable function
• Isolated digital input with configurable function
• Auxiliary input for CT (TA) (50mAac)
• Heater break or probe short-circuit alarm
• Self-tuning, Auto-tuning, Soft-start, bumpless Man/Auto function
• Double set, set ramp, timed output function
• Optically isolated RS485 serial line. Protocol: GEFRAN MODBUS RTU
• Self-diagnosis
• Rapid configuration from PC with Winstrum packet

Main applications

• Small industrial ovens
• Pipe welders
• Temperature control units
• Dryers
• Climatic cells and test benches
• Control panels with membrane keyboard

• Universal input configurable from faceplate
• Accuracy better than 0.2% f.s. under nominal conditions
• Up to 5 outputs, relay, logic, for control, alarms
• Hot/cold function with selection of cooling liquid
• 3 alarms with completely configurable function
• Software alarm for load interrupt or probe in short circuit (LBA)
• Self-tuning, Auto-tuning, Soft-start, bumpless Man/Auto function
• Double set, set ramp, timed output function
• Setpoints programmer functions with 3 configurable steps
• Configurable internal buzzer
• Optically isolated RS485 serial communication, protocol: MODBUS RTU
• Self-diagnosis
• Panel mounting
• Screw connections with removable terminals

• Inputs for thermocouples and resistance thermometers completely configurable from the faceplate
• Offset function on the input signal
• Relay, mA or logic main output
• Between 1 and 3 configurable alarms
• Auxiliary input for C.T.
• Alarm for open circuit load or short-circuit probe
• PD alarm output configurable for cooling
• Self-tuning/Auto-tuning, Soft-start, bumpless Man/Auto transfer
• Serial line: opt isolated 4-wires

• Universal input configurable from the faceplate
• Accuracy 0,2% f.s.
• Two control outputs: relay, logic or analogue with Heat/Cool function
• 3 configurable alarms
• 2 analogue outputs
• 2 digital inputs with configurable function
• Auxiliary input for C.T. or remote setpoints
• Heater Break or short-circuit probe alarm
• Self-tuning, Soft-start, Auto-tuning, Man/Auto, Bumpless, Setpoints, Locale/Remoto
• Function multi-set, rampa di set, timer

• Universal input configurable from the faceplate
• Acquisition of the input signal every 120msec ; resolution 30000steps
• Two control outputs: relay, logic or analogue with Open/Close valve function
• 3 configurable alarms
• 2 analogue outputs (setpoints retransmission)
• 2 digital inputs with configurable function
• Auxiliary input for valve position potentiometer feedback
• Heater Break or short-circuit probe alarm
• Self and Auto-tuning, Soft-start, Local/Remote setpoints, Auto/Man
• Multi-set function, timer set ramp

• Universal input configurable from the faceplate
• Acquisition of the input signal every 120msec ; resolution 30000steps
• Two control outputs: relay, logic or analogue with Heat/Cool function
• 3 configurable alarms
• 2 analogue outputs (setpoints retransmission)
• 2 digital inputs with configurable function
• Auxiliary input for C.T. or remote setpoints
• Heater Break or short-circuit probe alarm
• Self and Auto-tuning, Soft-start, Local/Remote setpoints, Auto/Man
• 12 (16) steps arranged in max. 4 programs
• Second SP retransmitted to a slave controller, with same time-base

• Universal input configurable from the faceplate
• Acquisition of the input signal every 120msec ; resolution 30000steps
• Two control outputs: relay, logic or analogue with Heat/Cool function
• 3 configurable alarms
• 2 analogue outputs (setpoints retransmission)
• 2 digital inputs with configurable function
• Auxiliary input for C.T. or remote setpoints
• Heater Break or short-circuit probe alarm
• Self and Auto-tuning, Soft-start, Local/Remote setpoints, Auto/Man
• Function multi-set, rampa di set, timer

• Universal input configurable from the faceplate
• Acquisition of the input signal every 120msec ; resolution 30000 steps
• Two control outputs: relay, logic or analogue with Open/Close valve function
• 3 configurable alarms
• 2 analogue outputs (setpoints retransmission)
• 2 digital inputs with configurable function
• Auxiliary input for valve position potentiometer feedback
• Heater Break or short-circuit probe alarm
• Self and Auto-tuning, Soft-start, Local/Remote setpoints, Auto/Man
• Multi-set function, timer set ramp

• Universal input configurable from the faceplate
• Acquisition of the input signal every 120msec ; resolution 30000steps
• Two control outputs: relay, logic or analogue with Heat/Cool function
• 3 configurable alarms
• 2 analogue outputs (setpoints retransmission)
• 2 digital inputs with configurable function
• Auxiliary input for C.T. or remote setpoints
• Heater Break or short-circuit probe alarm
• Self and Auto-tuning, Soft-start, Local/Remote setpoints, Auto/Man
• 12 (16) steps arranged in max. 4 programs
• Second SP retransmitted to a slave controller, with same time-base

• Cascade control
• Ratio control
• Square root extraction on input signal
• Programmer with 4 setpoints and 4 ramps
• Thermocouple or resistance thermometer inputs and linear inputs with configurable scale and linearization
• Isolated inputs for remote setpoints, valve position feedback signal or load break detection
• Two control outputs with independent PID parameters (Heat/Cool)
• AUTO/MAN station with bump less transfer incorporated
• Configurable output for a retransmission signal
• Serial line: opt isolated 4-wires configurable. Protocol: GEFRAN CENCAL

• Thermocouple, resistance thermometer and linear inputs with configurable scales and characterization
• Remote setpoints, valve position or load current sensing input (optional)
• 8 configurable opt isolated digital inputs (optional)
• 8 configurable opt isolated outputs that may programmed with time (optional)
• Double independent PID outputs (Heat/Cool)
• 10 sets of PID tuning parameters to select from for each program step
• Configurable isolated retransmission output
• 2...10 configurable alarms
• Expansion up to 16 relay outputs (optional) (with 2 MD81 units)
• Serial line: opt isolated 4-wire configurable. Protocol: GEFRAN CENCAL or MODBUS

• Double configurable input for strain gauge / potentiometer / linear signal / TC / RTD
• Two auxiliary analog inputs
• Differential measurement
• High precision: 0.1 % f.s. ± 1 digit
• Automatic calibration for 6-wire strain gauge
• Transmitter power supply and strain gauge probe power supply
• PID controls with 8 sets of selectable parameters
• 4 configurable alarms, failsafe function
• Up to 3 isolated analog outputs for control and retransmission
• 4 digital inputs
• 4 relay outputs with configurable function
• Expansion with 4 configurable digital inputs and/or outputs
• Serial communication interface:
   - RS485/RS 232 MODBUS RTU protocol (optional)
   - Profibus DP Slave (optional)
• Front panel with three 5-digit displays and two bar graphs

4 universal process inputs
• 4 independent hot/cold PIDs
• 4 main outputs
• 4 auxiliary analog inputs
• 4 configurable outputs: relay / logic / TRIAC / continuous
• 2 configurable relay
• 2 digital inputs
• Standard communication port: Modbus RTU
• Optional port for Fieldbus: Profibus DP, CANopen, DeviceNet, Modbus RTU, Ethernet Modbus TCP
• Installs on DIN rod and panel

Unit consisting of: 

• Controller
• 30, 60, 80kW solid state relay
• Current transformers (one or four)
• Fuses-holder (option)
• 4 universal main inputs
• 4 heat/cool independent PID
• 4 main output internally wired to the SSR
• 4 auxiliary analog inputs (option)
• 4 configurable output (option):
  relay / logic / TRIAC / continuous
• 2 configurable relay alarm output
• 2 digital inputs
• Standard digital communication:
  Modbus RTU
• Optional Fieldbus communication:
  Profibus DP, CANopen, DeviceNet,
  Modbus RTU, Ethernet Modbus TCP
• DIN rail or panel mounting